English

Home > Products > Twin Screw Extruder > Color masterbatch PET color masterbatch Plastic Extruder Machine

Color masterbatch PET color masterbatch Plastic Extruder Machine

SHORT DESCRIPTION:

PET color masterbatch Plastic Extruder Machine This PET color master batch extruder machine has a special designed according to the characteristics and performance of PET HS Code: 8477.2010

  • Product Detail
  • Our machine can process the following materials:
  • Product Tags

PET color masterbatch Plastic Extruder Machine
PET: polyethylene terephthalate
polyethylene terephthalate Chemical formula is -OCH2-CH2OCOC6H4CO-
English name: PET Terephthalate,

Model: SHJ-52B （optional: SHJ-35B/D,SHJ50B/D,SHJ65B/D,SHJ75B/D)
HS Code: 8477.2010x
Screw speed: 400rpm, 500rpm for optional;
L/D ratio: 44:1
Motor power: 55KW
Heater: casting copper
Screen change with hydraulic workstation
Cooler: SL526

Talk about the PET characteristic
PET is a milky white or light yellow highly crystalline polymer with a smooth, glossy surface. Good creep resistance, fatigue resistance, friction resistance and dimensional stability, small wear, and high hardness, with the greatest toughness of thermoplastics: good electrical insulation performance, little affected by temperature, but poor corona resistance. Non-toxic, weather resistant, good stability against chemicals, low water absorption, resistance to weak acids and organic solvents, but not heat resistant to water immersion, not alkali resistance.
PET resin has a high glass transition temperature, slow crystallization rate, long molding cycle, long molding cycle, large molding shrinkage, poor dimensional stability, brittle crystallization molding, and low heat resistance.
In addition to the properties of PBT, PET has the following characteristics nucleating agents as well as improvements in crystallizing agents and glass fiber reinforcement.

1. Thermal deformation temperature and long-term service temperature are the highest in thermoplastic general engineering plastics.

2. Because of its high heat resistance, the enhanced PET is impregnated for 10S in the solder bath at 250℃, with almost no deformation and no discoloration. It is especially suitable for the preparation of electronic and electrical parts for solder welding:

3. The bending strength is 200MPa, the elastic modulus is 4000MPa, the creep resistance and fatigue property are good, the surface hardness is high, and the mechanical property is similar to that of thermosetting plastics.

4. PET resin and reinforced PET are the lowest-cost engineering plastics and have a high-cost performance because the price of ethylene glycol used in PET production is almost half that of butanediol used in PBT production.

Talk about the PET application:
PET is mainly used for fibers, with a small amount used for films and engineering plastics. PET fibers are mainly used in the textile industry. PET film is mainly used in electrical insulation materials, such as capacitors, cable insulation, printed circuit wiring substrate, electrode groove insulation, etc. Another application area for PET films is wafer base and baseband, such as motion picture film, X-ray film, audio tape, electronic computer tape, etc. PET film is also used to vacuum transfer aluminum into metalized film, such as gold and silver wire, micro capacitor film, etc. Another use for PET is in blow molding products, and polyester stretch bottles for packaging.
Glass fiber reinforced PET is suitable for electronic and electrical and automotive industries, used in various coil skeletons, transformers, TV, recorder parts and shell, automobile lamp holder, lamp shade, white heat lamp holders, relays, sun rectifiers, etc.

Process

Representative materials

Mixing nature-changing

PE,PP,PS+SBS,PA+EPDM,PP+NBR,EVA +Silicon rubber, etc.

PE,PA,PC,CPE+ABS(alloy),PBT+PET,PP+ PE etc.

Filling nature-changing

PE,PP,EVA, etc.+ Calcium carbonate, talcum powder, titanic powder

ABS,PC,PS, etc.+ aluminum hydroxide, magnesium hydroxide, antimony oxide.

PP,PA,ABS +ferrous powder, sulphuric powder ceramic powder

Functional machine pellets

PP,PA,ABS,PBT, etc+ anti-burning agent and other auxiliary agents: combustion-supporting machine pellets

PE,PP,PS, etc+ starch: de-composing machine pellets

PE+ fog-preventing dipper, stabilizer: dual-prevention machine pellets

PE,EVA=ABS etc+ carbon black: black machine pellets

Colored machine pellets

PE,PP,ABS,AS,PA,EVA,PET +pigment and auxiliary

Intensified glass fibers and carbon fibers

PP,PBT,ABS,AS,PA,PC,POM,PPS,PET etc.+ long fibers, small fibers, carbon fibers, crystals and so on, etc.

Various cables

HDPE,LDPE,LLDPE,MDPE,EVA,PVC,PP, etc. insulating cables,coatings,

PE peroxide silicon alkyl crossing cables: radialization crossing cables

Special materials

EVA heat-melting glue, polyurethane, fluorine rubber, fluorine plastics, PP cigarette filtering material and TPR sole material

Reaction extruding

Poly-amide condensate, poly-amide melting polymerization, poly-amide polythene-adding, poly-carbonate condensate, etc.

Exhausting and volatilization

Polystyrene oxide, high-absorbing resin, chlorine sulphur polyethylene

Powder paint

Polyester, ring oxide, lactide, polyurethane, acrylate
135 EXTRUDER 95 EXTRUDER ABS extruder elastomer extruder LARGE OUTPUT EXTRUDER MAH EXTRUDER masterbatch extruder Micro particle extruder PA Extruder PA6 EXTRUDER PA66 EXTRUDER PE EXTRUDER plastic extrusion machine plastic particulate extruder POE extruder POM EXTRUDER PP EXTRUDER regranulation extruder TPE extruder TPR extruder TPU extruder twinscrew extruder